Solves: Pumps and loads that change location
Roxon Mobile 15 kW
The Roxon Mobile 15 kW (RM15) is a portable storage system with a 33 kWh LFP battery and a 15 kW three-phase output at 380/400 V. It charges from panels (up to 30 kW, 2 MPPT), from the grid or from a diesel generator that starts and stops automatically, and supports up to 6 units in parallel: 90 kW and 198 kWh.
15 kW33 kWhLFPIP54670 kg
Illustrative image
Application · Agriculture and pumping
Energy for irrigation and pumping where the grid doesn’t reach.
Extending the grid to a remote pump can be costly, and running a generator means hauling fuel. On top of that, starting a motor takes more power than running it.
Used in: Industry and remote operations · Agriculture and pumping
View the application →- 01
Up to 6 in parallel
90 kW and 198 kWh with six units, adding units as the load grows.
- 02
30 kW solar charging
Two 160 to 900 V MPPTs and 98 % panel-to-AC efficiency.
- 03
Generator control
Starts and stops the generator via dry contact; with 20 kVA it charges in about 2 h.
- 04
Aerosol suppression
In every cell and in the cabinet, with 4G and GPS monitoring.
Code: RM15. Data from the datasheet, updated October 28, 2026.
| Parameter | RM15 |
|---|---|
| General | |
| Chemistry | Lithium iron phosphate (LFP) |
| Form factor | Portable cabinet, forklift base |
| AC output | |
| Rated three-phase power | 15 kW |
| Voltage and frequency | 380 / 400 V, 50 / 60 Hz |
| Rated current | 21.8 A |
| Single-phase output | 220 / 230 V, 5 kW rated; 7.5 kW max. for 1 h |
| Bypass power | 22.5 kVA |
| Connection | 3P + N + PE, CEE industrial sockets |
| Overload | 120 % for 10 min / 150 % for 10 s |
| AC input (charging) | |
| Rated charging power | 15 kW |
| Voltage and current | 380 / 400 V, 22.5 A |
| Input apparent power | 22.5 kVA |
| THDi | ≤ 3 % |
| Battery | |
| Rated energy | 33 kWh |
| Depth of discharge | 90 % |
| Battery voltage | 550–950 V DC |
| Solar input | |
| Max. PV power | 30 kW |
| MPPT voltage range | 160–900 V |
| Number of MPPTs | 2 (1 string per MPPT) |
| Max. input current | 30 / 30 A |
| Start-up voltage | 180 V |
| Generator | |
| Generator control | Automatic start and stop via dry contact |
| Charging time | Approx. 2 h with a 20 kVA generator or a 15 kW grid supply |
| System | |
| Max. efficiency | 98 % (PV to AC) / 94.5 % (battery to AC) |
| Topology | Transformerless |
| Parallel operation | Up to 6 units: 90 kW / 198 kWh |
| Fire suppression | Hot aerosol (cell and cabinet) |
| Monitoring | EMS with 4G and GPS positioning |
| Environment | |
| Ingress protection | IP54 |
| Operating temperature | −20 to 50 °C |
| Relative humidity | 0–100 (non-condensing) % |
| Altitude | 4,000 (derating above 2,000) m |
| Cooling | Natural |
| Noise | ≤ 45 dB |
| Physical | |
| Dimensions (length × width × height) | 1,040 × 1,092 × 1,157 mm |
| Weight | 670 kg |
Send us the load, the hours of autonomy you need and the sources you have. We’ll send back a configuration with equipment and datasheets.
Ask about this unitQuestions about the Roxon Mobile 15 kW
What is the Roxon Mobile 15 kW used for?
To power remote sites, construction sites, irrigation pumps, events and lighting without the grid, or to reduce generator hours. It delivers 15 kW three-phase at 380/400 V and 5 kW single-phase at 220/230 V, with 33 kWh of LFP battery at 90 % depth of discharge.
How is the Roxon Mobile 15 kW charged?
With solar panels (up to 30 kW across two 160 to 900 V MPPTs), with the three-phase grid (15 kW) or with a diesel generator that starts and stops via dry contact. With a 20 kVA generator or a 15 kW grid supply, charging takes about 2 hours.
Can several Roxon Mobile 15 kW units be connected in parallel?
Yes. Up to 6 units connect in parallel, for 90 kW and 198 kWh.
In what conditions does the Roxon Mobile 15 kW operate?
Between −20 and 50 °C, with 0 to 100 % relative humidity non-condensing and up to 4,000 m altitude, with derating above 2,000 m. It is IP54, naturally cooled and emits 45 dB or less.
